|
| DRIVE SYSTEM FOR ELECTRICAL VEHICLE |
| A lot of allowed operating points for this mode must be turned up inside green area of the shown mechanical curve.
A lot of allowed operating points for this mode must be turned up inside red area of the shown mechanical curve and must has limited duration. Duty cycle of the each overload mode must be chosen to prevent overheating of the motor (or will be limited by temperature feedback inside power controller). |
|
| SUPER-HIGH CAPACITY CONDENSER TO PROVIDE A RELIABLE START-UP OF INTERNAL COMBUSTION ENGINES INSTALLED IN AUTOMOBILES AND TRACTORS |
| A new type of super-high capacity condenser (SHCC), Econd-Super, developed by Russian scientists, is the mostly efficient for starting-up carburetor and diesel internal combustion engines (ICEs) with a rated power of 10 h.p. to 3,000 h.p., railroad rolling stock, cars, freight transport, diesel power plants, ship engines as well as for agricultural, road building and municipal technique. The SHCCs are very effective if used at low temperatures and when accumulator batteries (ABs) are discharged. |
|
| THE "STIMUL" ADAPTIVE SYSTEM OF OPTIMAL IGNITION |
| The introduction of feedback
directly from the combustion chamber enables the system, irrespective of
specific factors affecting operating conditions, to adapt in such a way as to
assure maximum engine output in the changed conditions by correcting the
ignition moments. |
|
| AXIAL DIESEL ENGINE |
| The design of this
multifunctional axial diesel engine is fundamentally new for commercial
engine-making. As compared with engines of traditional designs the new one has
obvious and numerous advantages. Its design allows for application in the future
of wide (up to 50% In volume) use of polymer composites and structural ceramics. |
|
| A NEW GENERATION ROTOR-PISTON ENGINE |
| It is well known that work to
create an internal combustion engine (ICE) whose distinctive feature would be
the absence of reciprocating motion in its main unit was started practically
from the moment an ICE was developed with crank conversion of reciprocating
motion into rotary motion of the output shaft (engines with crank conversion of
piston motion are later called piston engines). |
|
| PIEZOENGINES: POSSIBILITIES AND PROSPECTS |
| Piezoelectric engines (PEE)
represent an engineering trend which until recently required significant efforts
to find its own niche. PEEs have a number of unquestioned advantages over
electromagnetic or other engines, which are now widely used. |
|
Engines
