 |
Articles and Publication Space Astronomy MEASUREMENT OF THE ABSOLUTE VELOCITY OF EARTH
MEASUREMENT OF THE
ABSOLUTE VELOCITY OF EARTH
©
Glushko Vladimir Pavlovich; Glushko Vladimir
Vladimirovith; Glushko Vitaly Vladimirovith
Physical-technical laboratory “Glushko” LTD
Contact to the author:
ftlg-glushko@yandex.ru
ABSTRACT
PACS: 03.30 + P
Multi day interferential
experiments with the use of radio waves of super high frequency band have
revealed anisotropy of the space properties, connected with the motion of Earth
relatively to physical vacuum with the speed of 700 ± 50 km/s in direction
having the following astronomical longitude - α = 12h ± 1h
.
____________________________________________________________
The principal idea of the
experiment consists in determination of functional relationship between the
value of time interval for movement of light between two points, located on the
Earth surface on the “West-East” line, and time of measurement. Such connection
comes from the theory of ether (or the physical vacuum), connected with the
orbital motion of Earth around of the Sun and with the Earth’s daily rotation.
Both of these motions commonly lead to the fact that projection of the planet’s
orbital speed vector on the direct line connecting the points depends on the
time of the day. This circumstance in turn leads to changes of actual light of
speed in the frame of reference connected with the planet at its propagation
between the points and consequently to the change of its time intervals.
Theoretically, in the first approximation, dependence of the time intervals
change ∆ t from the planet’s angular displacement can be determined under the
following formula
(1),
Where: ℓ - the distance between watches, ν - speed of the planet’s motions with
respect to physical vacuum, c – light propagation speed with respect to physical
vacuum, and φ – planet’s angular displacement, with respect to the zero meridian
and observer meridian (star time).
With the aim for determining this type of relationship within the day,
measurements of the specified time intervals shall be preformed in strictly
fixed hours of the same day. For this purpose, flashes of light shall be
sequentially performed in one point and in equal time intervals. Registration of
flashes were performed in another point, time intervals between flashes of light
were also measured. It is worth mentioning that realization of the specified
consecutive measurements abolishes necessity in synchronization of watches,
intended for measuring speed of light. Indeed, arrival of the first flash of
light represents a signal for launching the countdown of the time intervals,
which will be lasted until the second flash of light. Identical clock rate (pace),
which determines the accuracy of these measurements, is the determinative (significant)
feature of such experiment. Numerical calculations show that proof of the light
speed anisotropy, which may be different depending on the orbital motion of
Earth around the Sun with the speed of 30 kilometers per second, for example at
the distance between experimental watches of 300 meters, may be determined on
conditions of the accuracy of measurement, equal to 10-10 seconds.
Besides experiments with direct measurements, the researches have also performed
indirect (mediate) measurements, which allow measuring physical values
proportional to these intervals. For example, the usage of two independent
sources of light or radio waves of the high time coherence, located in the same
points, is also possible. Displacement of interferential figure strips,
representing the sum of emissions in the point of observation will be considered
as the registered physical value. For example, when the emission from the source
of light, located in the first point hits the second point and interferes with
emission of the second source of radio waves. In this case, the specified
measurements of the time intervals between flashes are identified with
measurements in the phase of interfering waves. This provision refers to both
laser sources of light and quantum amplifiers of radio waves - maser oscillators.
In this regard, it is worth mentioning the experiment J.P.Cedarholm, and
C.H.Townes with the use of two masers (1). Oscillator’s frequencies, located in
immediate proximity to each other, have made 23870 MHz. Random fluctuations in
the measurements of relative frequencies of both masers have made 1/10 Hz.
During the long observation period (almost during thee month time interval),
average relative oscillator’s frequency has been changed lesser than on 1/1012.
This experiment has proved high time coherence of two maser oscillators. The
authors have performed this experiment for determining absolute velocity of
Earth through measuring frequency of oscillators’ emissions, considering their
movement relatively to physical vacuum i.e. based on the Doppler’s principle.
Result of the mentioned experiment was negative, as the determined variations of
oscillator’s frequencies were two times lower than the computed value. It is
worth mentioning that results of the aforementioned experiment were not sudden
and fully met the conception of the Doppler’s principle formation mechanism. i.e.
in concordance with principles of waves processes’ kinematics proceeding in the
continuums. Indeed for the source and receiver of radiation, moving with equal
speed relatively to wave process propagation media (i.e. on condition when
distance between the source and receiver of radiation remains constant), change
of the radiation frequency in this frame of reference is basically impossible.
This explains “zero” result of the aforementioned experiment. However, if the
distance between two masers would be not less than 150 meters, than 12 hours
observation of interferential figure of their emissions would result in their
displacement on one strip for the value of orbital velocity of our planet equal
to 30 km/sec.
In super high frequency band such experiment could be performed with the use of
less expensive measuring equipment, for example well studied traditional radio
waves oscillators, such as reflection oscillators (klystrons), magnetrons,
travelling-wave tubes and other electronic devices, having greater time
coherence, as their initial radiation phase does not change during all time of
waves generation. However, this arise another problem – the problem of
generators radiating frequency similarity and its stabilization during the whole
experiment. Let us notice that the well-known radio electronic devices –the
system of the radio devices frequency quartz stabilization, have already found
successful decision of the given problem. Exactly the deep stabilization of the
radio waves generator’s frequencies provides technical ability for creation of
the waves’ sources, having practically equal generation’s frequency, thus
allowing comparing phases of the two waves within several days. Stability of
radio waves frequency, produced by the modern radio devices, equipped with the
system of quartz stabilization, in particular by klystrons generators,
characterized by correlation of the interval change maximal value to such
frequency, observed during the day, reaches values, lesser than 10-12 - 10-10.
The described experiment included application of thermo stabilized klystrons
generators of radio waves (in the intervals from 10 to 40 degrees of Celsius) (having
total wavelength of 3 centimeters), equipped with the frequency quartz
stabilization system. The radio wave, generated by the oscillator, located in
the first point was received by the radio receiver in the second point, while
the phase of this wave was compared to the phase of wave of another klystron
generator, located in the very same second point. Changes of the radio waves
phases difference has been identified with change of time, used by the radio
wave for passage of the very same way at various times of the day.
Practically the experiment was carried out in the following way. The radio wave,
generated by the first generator, being received in the second point, was
amplified and normalized on the amplitude and then moved to the phase detector.
The phase detector – the mixing pentode, had two inputs, one of which was
exposed to voltage from radio waves, received from the generator, located in the
first point. The second input was exposed to voltage coming from the second
klystron generator, located next to it, in the second point. The mixing pentode
generated a variable signal (beat), which form and amplitude was directly depend
on the difference of frequencies and displacement of the voltage fluctuating
phases, supplied to both of inputs. The signal generated by the mixing pentode
was directed on the measuring condenser and charge it. The condenser was charged
within 7 seconds (7X1010 of the full radio waves period), then it was
disconnected from pentode and exposed to measurement of voltage on its plates
within the following 3 seconds. Then the value of the digit current, flowing
through the strictly normalized resistance, closing its plates during the
measurement of voltage on its plates. After the control closing of the
condenser’s plates (complete nullification of the condenser), it was again
connected to the pentode. Record of data was carried out on the tape recorder,
with indication of the time of measurement. All of the mentioned above
operations were carried out in automatic regime with the help of device
generating commands from impulse meters, supplying from the quartz generator of
frequency. Summation of signal within 7 seconds (7X1010 of the full radio waves
period), has allowed normalizing the signal’s value (revealing its systematic
value, independent from the time of measurement), occurring as a result of
discrepancy of adjusted frequencies of generators, as well as averaging its
value from any unaccounted stochastic processes, flowing in electronic equipment.
It is worth mentioning that the use of pentode results in appearance of minimal
and maximal anode current at the change of phase of one interfering wave on the
value equal to half-period.
Totally, we have conducted four types of daily experiments. The firs type
consisted from the series of experiments, which provided placement of both
devices in the very same place. In this case, coincidence of the oscillators’
frequencies was achieved with the help of phase inverter (phase changer),
positioned between the pentode and the second klystron. Results were checked by
its influence on the value of anode klystron current. Equality of oscillators’
frequencies was accepted in cases, if the anode current was changed at the
change of the wave’s phase for 1/10 of the period. . Other experiments do not
require usage of phase inverter.
During second type of experiments the devices were moved from each other on the
distance of 300 meters, under the line east-west, in the third type of
experiment the devices were moved apart on the distance of 750 meters, in the
forth one – on 1,5 kilometers away from each other. Each of experiments provided
continuous measurement during 24 hours in the interval of 10 seconds. Portable
generator has produced electromagnetic waves trough the specially directed
antenna. Other similar antenna and the receiver of direct amplification used to
receive this signal. They have been located in base point, next to location of
the second generator, phase detector, measuring and recording equipment.
Conduction of these experiments have allowed to reveal the measuring frequencies
of voltage and current of measuring condenser for distances of 300, 750 and 1500
meters differ from each other only on the periodical daily dynamics of voltage,
having different numbers of maximums and minimums. Its number directly depends
on the distances between the devices. Experiments, during which klystrons
generators were located in the very same place, periodical daily dynamics of
voltage and current of measuring condenser have not been revealed, and maximal
“noise” amplitude of these values has made approximately 15-17% from maximal
amplitude when the devices were moved apart on the specified distances. On the
distance of 300 meters, daily measurements have revealed 187 maximums, on the
distance of 750 meters this number has made 467 and on 1500 meters – 933
maximums correspondingly. Number of maximums per unit of observation time (for
example, during one hour) was different during 24 hours. Time for origination of
minimal number of maximums per unit of time corresponds to astronomic
coordinates of direct ascension α = 12h ± 1h, and 24h ± 1h. This direction is
parallel to direct line connecting constellations of Aquarius and Pisces with
the borders of constellations of Lion and Virgo. The second astronomical
coordinate (declination) has not been determined. Number of maximums calculated
for the specified time interval (12 hours) as well as practically direct
proportional dependence of their number on the increased distances between
generators has allowed making a conclusion, that planet moves in the specified
direction with absolute speed of 700 ± 50 km/s.
Literature:
1. Cedarholm J.P., Bland G.F.,
Havens B.L., Townes C.H. // Phys. Rev. Let. 1958. IVol.l. P.342.
Publishing date: September 22, 2008
Source: SciTecLibrary.ru
Back
|  |