Recent updates to Prospecting, production activity and waste handling of minerals:

METHANOL

Methanol is used as semi-product in many industrial syntheses. The main consumer is the production of formaldehide, which is used to manufacture formaldehide resins, plastics and synthetic fibres. In oil-processing industry methanol is used as selective dissolvent to clean gasoline from mercantanes and also, in the extraction of toluene. Besides, Methanol is used to obtain a fuel additive with high octane content (which result in the increase of the engine power and in the steep decrease of exhaust), in protein synthesis (protein-vitamin concentrate), in the production of dymethylreftalate, pesticides and agents for chemical protection of vegetation; in the production of acetic acid, hexamine, carbamide resins, photofilm, plexiglass.

GENERAL-PURPOSE CERAMIC FILTERS

We present ceramic filters of new generation. It is important that with the help of these filters you can purify a wide number of liquids and gases from mechanical impurities. It is also important that cost of new ceramic filters is much less in comparison with the one of conventional ceramic filters.

FLOW RATE METERS OF GAS AND LOW-VISCOUS LIQUIDS

"Jet" flow rate meters of natural gas and low-viscous liquids are designed for completing a set of gas measurement and distribution stations, measuring units of different levels; they are installed on pipelines of 60 -1420 mm diameter.

OIL REGISTRATION COMPLEX

Registration system of oil and oil content liquids is designed for routine measuring of composition and flow rate of well liquid, field and commercial measuring of oil by spectrometry method.

SCRATCHALIZER SC-65

Scratchalizer is used at the sucker rods of SSRP in order of rod wear reduction and lifting pipes mechanical dewaxing. Depending on a rod wiper stroke length and the length of sucker-rods, from 5 to 11 scratchalizers are fixed at one rod.

MOBILE REPAIR SHOP PRM-1

Mobile Repair Shop PRM-1 is designed for performing repair operations in the field conditions. Technological block of the shop is located in the wagon, installed at the chassis of high cross-country capability truck KrAZ-250 or KamAZ-5312.

PPC-24 SEMITRAILER-TANK

The semitrailer-tank is intended to transport light petrochemical products with the density of from 0,7 to 0,8 g/cm3, along the roads of the general road network, designed for passing road trains with axial load of 98 kN (10tf). It is utilized in any period of twenty-four hours in the ambient air temperature range of from -45°C to +45°C The semitrailer-tank consists of two blocked tanks of 12 m3 capacities each placed on chassie of semitrailer MAZ-9397.

HIGH-TEMPERATURE STEAM WELLHEAD EQUIPMENT ATP 65-16-350 UHL-1

High-temperature steam wellhead equipment is designed for wellhead sealing of thermally treated wells. It provides possibility of heat carrier flow control and subsurface heat-insulated pipes / surface heat insulated steam pipeline thermal extension compensation (See picture).

HIGH-TEMPERATURE CASING HEADS GKT-168 UHL-1, GKT-146 UHL-1

Casing Heads are supposed to be installed at the wellhead of new steam-injection wells using pretensioned casing cementing technology

SET OF THERMAL OIL RECOVERY EQUIPMENT

A set of subsurface (downhole) and wellhead (surface) equipment assures well production lifting up to the surface.