|
| PAGE ERASING MODE IN FLASH-MEMORY ARRAY |
| FIELD: erasing mode in flash-memory array.
EFFECT: greatly reduced excitation at memory locations not chosen for erasing in erasing chosen ones. 14 cl, 4 dwg |
| Publishing date: March 10, 2004 |
|
| RAISING COMMUNICATION EFFECTIVENESS BY INSERTING ONE SIGNAL INTO OTHER SIGNAL |
| FIELD: radio communication systems.
EFFECT: enhanced effectiveness of communications. 30 cl, 11 dwg |
| Publishing date: March 2, 2004 |
|
| OPTICAL RADIATION VIDEO CONVERTER |
| FIELD: multicomponent photosensitive devices.
EFFECT: simplified design, reduced supply voltage. 2 cl, 2 dwg |
| Publishing date: February 25, 2004 |
|
| ELECTRIC CABLE COVERED WITH FOAMED WATER-BARRIER SEMICONDUCTING LAYER |
| FIELD: power transmission or distribution cables for carrying intermediate- or high-voltage currents.
EFFECT: enhanced operating reliability of cable. 29 cl, 1 tbl |
| Publishing date: February 3, 2004 |
|
| PLASMA ELECTRON SOURCE |
| FIELD: plasma, electron-beam and plasmachemical engineering; experimental physics.
EFFECT: enhanced operating pressure with accelerating gap strength maintained at same level. 1 cl, 1 dwg |
| Publishing date: December 9, 2003 |
|
| NONVOLATILE MEMORY LOCATION |
| FIELD: automatic control and computer engineering.
EFFECT: enhanced noise immunity of nonvolatile memory location. 2 cl, 1 dwg |
| Publishing date: December 9, 2003 |
|
| METHOD FOR PRODUCING FLEXIBLE MEMBER OF MICROMECHANICAL DEVICE |
| FIELD: manufacture of flexible members for micromechanical sensors.
EFFECT: improved quality of members due to enhanced strength and repeatability of their characteristics. 1 cl, 2 dwg _ |
| Publishing date: September 9, 2003 |
|
| IMAGE TAKING DEVICE |
| FIELD: image identifying methods for fingerprinting studies.
EFFECT: reduced power requirement and fingerprinting equipment size; enhanced resolving power. 7 cl, 16 dwg |
| Publishing date: August 19, 2003 |
|
| METHOD FOR ITERATIVE BLOCK ENCRYPTION OF BINARY DATA |
| FIELD: electric communications and computer engineering.
EFFECT: enhanced encryption speed. 3 cl, 2 dwg |
| Publishing date: August 12, 2003 |
|
| DEVICE FOR PULLING MONOCRYSTALS |
| FIELD: growing monocrystals for semiconductors and semiconductor joints.
EFFECT: enhanced efficiency. 7 cl, 5 dwg, 5 ex |
| Publishing date: May 27, 2003 |
|
| RANDOM-SIGNAL GENERATOR |
| FIELD: radio engineering and radio communications.
EFFECT: uniform spectrum obtained in desired frequency band with provision for correcting spectral envelope. 3 dwg |
| Publishing date: April 29, 2003 |
|
| PROCESS OF MANUFACTURE OF ACTIVE ELEMENT OF HELIUM-NEON LASER WITH COLD CATHODE |
| FIELD: microelectronics, technology of manufacture of gaseous discharge equipment.
EFFECT: prolonged service life of active element. 2 cl, 4 dwg |
| Publishing date: April 8, 2003 |
|
| METHOD AND DEVICE FOR CONVERTING THERMAL IMAGE INTO ELECTRIC SIGNAL |
| FIELD: optoelectronic engineering; two- dimensional infrared-to-visible image converters of high spatial resolution.
EFFECT: facilitated manufacture of matrix converters. 3 cl, 3 dwg |
| Publishing date: April 8, 2003 |
|
| DEVICE CONVERTING AC VOLTAGE TO CODE |
| FIELD: electric measurement technology.
EFFECT: increased accuracy. 4 cl, 5 dwg |
| Publishing date: February 18, 2003 |
|
| PHOTOLUMINESCENT PHOSPHOR WITH OVERLONG-DURATION AFTERGLOW |
| FIELD: luminophors.
EFFECT: enhanced luminescence characteristics and increased hydrolytic stability. 3 cl, 1 tbl, 6 ex |
| Publishing date: February 4, 2003 |
|
| METHOD AND DEVICE FOR CONTROLLING INPUT OF SPEECH RECORDING INPUTS OF VOICE IDENTIFYING DEVICE FOR USE IN HANDSET AND IN LOUDSPEAKER COMMUNICATION EQU |
| FIELD: telephony; portable digital telephone sets incorporating loudspeaker set.
EFFECT: provision for joint input of speech records in handset and in loudspeaker communication set. 17 cl, 4 dwg |
| Publishing date: October 15, 2002 |
|
| DEVICE FOR REDUCING ELECTROMAGNETIC EFFECTS ON COMMUNICATION LINES |
| FIELD: electrified railways.
EFFECT: reduced electromagnetic influences on communication lines. 1 dwg, 1 an |
| Publishing date: September 17, 2002 |
|
| PROCESS OF PRODUCTION OF CLEAR CURRENT-CONDUCTING FILM BASED ON INDIUM AND TIN OXIDES |
| FIELD: optoelectronic devices.
EFFECT: improved electrical characteristics of films based on indium and tin oxides, decreased labor input to process of film production. |
| Publishing date: May 28, 2002 |
|
| HERMETICALLY SEALED CONNECTOR |
| FIELD: radio and electronic engineering; aerospace equipment.
EFFECT: enlarged operating temperature range, enhanced strength, improved reliability of sealing. 2 dwg, 1 tbl, 2 ex |
| Publishing date: August 29, 2001 |
|
| OFF-LINE POWER SUPPLY |
| FIELD: electrical and power engineering; power supplies for corrosion-preventive devices of oil and gas pipelines, navigation and light beacons, weather stations, monitoring and burglar alarm devices, and the like.
EFFECT: reduced fuel consumption and transport charges, enhanced efficiency of power unit. 4 dwg |
| Publishing date: August 29, 2001 |
|
| METHOD OF PREPARING POLYMER OPTICAL FIBER |
| FIELD: polymer materials.
EFFECT: reduced loss of luminous flux in optical fiber and loss of monomer in kern material. |
| Publishing date: August 7, 2001 |
|
| HELMET TARGET INDICATION SYSTEM |
| FIELD: optoelectron instrumentation.
EFFECT: enhanced accuracy characteristics of video signal and quick response of system. 3 cl, 3 dwg
|
| Publishing date: June 26, 2001 |
|
| SITUATION IDENTIFYING DEVICE |
| FIELD: computer engineering.
EFFECT: enhanced precision of identification. 3 dwg |
| Publishing date: June 26, 2001 |
|
| ASSOCIATIVE MEMORY MATRIX |
| FIELD: computer engineering.
EFFECT: enlarged functional capabilities. 1 dwg |
| Publishing date: June 26, 2001 |
|
| METHOD FOR PRODUCING SINGLE-MODE OPTICAL FIBER |
| SUBSTANCE: method involves cutting semi-circular slots, 1-2 mm deep, on outer surface of cylindrical blank, placing the latter in first quartz conduit, fusing first conduit with blank, etching internal holes of blank in etching solution for the first time, installing loaded rods in internal holes of blank, fusing them with blank to form solid cylindrical rod, and drawing out optical fiber. |
| Publishing date: May 8, 2001 |
|
| LASER |
| FIELD: quantum electronics; actively quality-switched process lasers. |
| Publishing date: April 25, 2001 |
|
| INTEGRATED-CIRCUIT CHIP COATING |
| FIELD: integrated circuits of electric, electronic, optoelectronic, and/or electromechanical components. |
| Publishing date: April 25, 2001 |
|
| A METHOD OF PRODUCTION OF A ONE-MODE LIGHT CONDUCTING CHANNEL IN A TRANSPARENT DIELECTRIC TROUGH DIELECTRIC STRUCTURE MODIFICATION |
| The methods applied today are
based on a radiation of a certain area of dielectric with a femto-second laser.
According to the method proposed, a femto-second radiation focused on the
selected area of dielectric by an axion is used to produce one light conducting
channel... |
| Publishing date: August 7, 2000 |
|
| A METHOD TO MANUFACTURE CRYSTAL COMPONENTS FOR HIGH FREQUENCY QUARTZ RESONATORS |
| The method proposed includes
preliminary polishing of crystal components with abrasive powders and
intermediate & final two-sided polishing by micro-powders with consequent
reduction of abrasive grains size... |
| Publishing date: August 7, 2000 |
|
Electronics engineering
