|
| METHOD OF VENEER IMPREGNATION |
| FIELD: woodworking industry; production of thin veneer given fire-retarding treatment and used for facing of fireproof plywood.
EFFECT: higher efficiency. |
| Publishing date: February 10, 2004 |
|
| METHOD OF PRODUCTION OF IMPREGNATED VENEER |
| FIELD: woodworking industry; applicable in production of thin veneer given fire-retarding treatment used for facing of fireproof plywood.
EFFECT: higher efficiency of method. |
| Publishing date: February 10, 2004 |
|
| PROCESS OF WOOD DRYING |
| FIELD: woodworking.
EFFECT: increased efficiency of wood drying due to acceleration of drying process with simultaneous removal of internal stress in wood with additional effective protective saturation of it. 7 cl |
| Publishing date: December 9, 2003 |
|
| PROCEDURE CONTROLLING LIST AND SINKING OF SOLID MASS STRUCTURE |
| FIELD: construction industry, control over spatial position of structures and constructions listing as result of nonuniform settlement of ground foundations.
EFFECT: potential to diminish list of structure with simultaneous provision for operation safety. 3 dwg |
| Publishing date: October 7, 2003 |
|
| INSTALLATION FOR SINKING AND PULLING OUT OF PILES |
| FIELD: civil engineering.
EFFECT: increased load capacity and efficiency when operating under heavy ground conditions, reduced noise and vibration. 2 cl, 5 dwg |
| Publishing date: August 19, 2003 |
|
| METHOD OF PREPARING BLACK CRUSHED STONE |
| FIELD: production of road-building materials.
EFFECT: increased efficiency and reduced loss of crushed stone. 1 tbl |
| Publishing date: July 15, 2003 |
|
| METHOD FOR PRODUCING EXPANDABLE CEMENT MIXTURE |
| FIELD: construction material industry.
EFFECT: increased efficiency and improved quality of cement mixture. 1 tbl, 2 ex |
| Publishing date: June 10, 2003 |
|
| PRODUCTION LINE FOR THERMAL-DIFFUSION APPLICATION OF PROTECTIVE COATS |
| FIELD: thermal-diffusion treatment; application of coats; mechanical engineering; chemical industry.
EFFECT: improved quality of coat. |
| Publishing date: May 27, 2003 |
|
| METHOD OF VOIDS SEALING |
| FIELD: construction engineering; filling of empty spaces in building structures of buildings and structures for restoration of flame travel and heat and sound insulation.
EFFECT: higher efficiency. 3 cl, 2 tbl, 5 ex |
| Publishing date: March 25, 2003 |
|
| LIGHT LINING SYSTEM TO FORM MEMBERS FROM NON-VISCOUS MATERIALS FOR UTILIZATION IN CONSTRUCTION |
| FIELD: construction industry.
EFFECT: simplified design and improved quality of formed members of structure. 22 cl, 19 dwg |
| Publishing date: March 12, 2003 |
|
| METHOD OF MELTING BITUMEN FROM WASTE BITUMEN ROLL MATERIALS |
| FIELD: manufacture of building materials; utilization of waste bitumen-containing materials.
EFFECT: optimization of heat- and mass-exchange process in processing waste roll materials. 4 cl, 7 dwg |
| Publishing date: February 11, 2003 |
|
| LIFE-SUPPORT AND SURVIVAL COMPLEX USING SOLAR ENERGY |
| FIELD: construction industry, specifically, equipment converting solar energy to electric energy.
EFFECT: provision for normal living conditions in areas of increased energy loads caused by external effects. 2 cl, 1 dwg_. |
| Publishing date: February 4, 2003 |
|
| DEVICE FOR PROTECTING WINDOW AND DOOR OPENINGS |
| FIELD: construction engineering.
EFFECT: reliable and efficient protection of internal rooms of buildings and structures. 8 dwg |
| Publishing date: December 3, 2002 |
|
| METHOD FOR REINFORCEMENT OF FOUNDATION-BEDS OF BUILDINGS AND FOUNDATIONS OF STRUCTURES |
| FIELD: civil engineering, applicable in reinforcement of foundations of existing buildings and structures with arrangement of drainage and service lines of various kinds.
EFFECT: simplified method, enhanced reliability of reinforcement of the building foundation-bed or structure foundation, prevented excessive humidification of the foundation, provided drainage of ground and industrial waste waters, as well as drying of foundation. 4 cl, 5 dwg |
| Publishing date: August 13, 2002 |
|
| INSTALLATION FOR PAINTING ROPES OF SUSPENSION BRIDGES |
| FIELD: processes and equipment for painting elongated cylindrical articles such as ropes of suspension bridges.
EFFECT: enhanced efficiency of painting articles at high altitude. 4 dwg |
| Publishing date: July 9, 2002 |
|
| DEVICE FOR MOLDING CERAMIC ARTICLES |
| FIELD: devices for molding ceramic articles mainly ceramic brick with relief pattern on front surface.
EFFECT: reduced quantity defects on front surfaces of articles; enhanced strength. |
| Publishing date: January 15, 2002 |
|
| BLOCK PARQUET AND METHOD FOR ITS PLACING |
| FIELD: construction engineering; finishing of floors in residential and public buildings.
EFFECT: improved attachment of parquet to surface; enhanced adhesion of coupling members; enlarged choice of pattern; reduced number of slits upon drying of components. 4 cl, 6 dwg |
| Publishing date: January 15, 2002 |
|
| DE-ICING COMPOSITION AND METHOD OF APPLICATION THEREOF |
| FIELD: chemical industry.
EFFECT: improved properties of the composition. 24 cl, 5 tbl |
| Publishing date: December 25, 2001 |
|
| DECORATIVE-FACING MATERIAL AND METHOD OF PREPARING THEREOF |
| FIELD: building industry.
EFFECT: greater process efficiency. 4 cl, 10 dwg, 3 ex |
| Publishing date: December 18, 2001 |
|
| ADHESIVE COMPOSITION (VARIANTS THEREOF) |
| FIELD: chemical industry.
EFFECT: higher service ability of the adhesive composition at -4-8 C for less than 8h, hardening time under natural conditions at 22 2C from 2 to 6 days and strength thereof. 2 cl, 3 tbl |
| Publishing date: November 14, 2001 |
|
| LINOLEUM MANUFACTURE METHOD |
| FIELD: production of floor coverings.
EFFECT: simplified method and increased efficiency. |
| Publishing date: August 7, 2001 |
|
| METHOD OF SANDS STABILIZATION |
| FIELD: binding agents for sands stabilization; applicable in construction, repair and operation of main gas pipelines and product pipelines, railroads and motor roads, canal slopes, bases of power line supports and communication facilities.
EFFECT: higher stability of clay aqueous suspension and mechanical and physical properties of coating. |
| Publishing date: August 7, 2001 |
|
| METHOD OF CLOSING KEYHOLE AND METAL DOOR |
| FIELD: locking equipment.
EFFECT: wider operational capabilities and wider range of locking device used for closing of keyholes. |
| Publishing date: May 30, 2001 |
|
| A DEVICE FOR PROCESSING A CONCRETE MIX |
| In the model, being proposed, the internal space of the said device is split in two chambers. Segment cross-section electrodes are installed along the first chamber axis at an angle of 120° against each other. |
| Publishing date: January 23, 2001 |
|
| A DEVICE FOR TRANSPORTATION AND UNLOADING BULK MATERIALS AND CONCRETE MIXTURE |
| Traditional devices used for transportation and unloading bulk materials and concrete mixture comprise a hopper with a lock and lifting hinges to transport material.
The new device is mantled on a frame and is additionally equipped with a distributing funnel which can interact with the hopper lock. |
| Publishing date: December 26, 2000 |
|
| METHOD OF MAKING AERATED CONCRETE AND ARRANGEMENT OF REQUIRED EQUIPMENT |
| By the new technology, parent mortar, basically with the density of 1700-1850 kg/m? is delivered into a power mixer. At the same time, mechanical foam with the foam ratio of 8-60 is supplied to the mixer from a foam generator and from a batch meter in two ways: top-down through a hose with a jet-nozzle and from the bottom through rigid multi-nozzle piping. |
| Publishing date: September 5, 2000 |
|
Building Construction
