|
| APPARATUS FOR WINDING METALLIC TUBES TO COIL |
| FIELD: machine engineering, namely apparatuses for mechanically working tubes by pressure, possibly winding water supply-, gas supply tubes and other tubes to coil with predetermined parameters.
EFFECT: possibility for winding metallic tubes to coil with predetermined parameters without deformation of their cross section. 2 dwg |
| Publishing date: March 2, 2004 |
|
| CRANK MECHANISM (VERSIONS) |
| FIELD: mechanical engineering; internal combustion piston engines.
EFFECT: increased engine power output owing to making of connecting rod or piston or crosshead with member changing value of piston stroke at working and idle strokes. 9 cl, 9 dwg |
| Publishing date: February 25, 2004 |
|
| COMBINATION MECHANISM OF HIGH RESISTANCE TO BREAKING-IN |
| FIELD: locking devices applicable in residential and public buildings and characterized by absence of keyhole and possible multiple rearrangement of key and lock code.
EFFECT: extended service potentialities. 5 dwg |
| Publishing date: December 23, 2003 |
|
| INTERNAL GEAR-CHANGE BICYCLE HUB |
| FIELD: transport engineering; bicycles.
EFFECT: improved reliability. 14 cl, 10 dwg |
| Publishing date: December 16, 2003 |
|
| ADJUSTABLE JOINT |
| FIELD: transport engineering.
EFFECT: facilitated adjustment. 2 dwg |
| Publishing date: December 2, 2003 |
|
| COMPRESSOR WITH HYDRAULIC DRIVE |
| FIELD: mechanical engineering.
EFFECT: reduced time taken for changing-over distributor, thus preventing pulsation at outlet and cavitation at pump inlet. 4 cl, 2 dwg |
| Publishing date: December 2, 2003 |
|
| PUMP FOR HANDLING VISCOUS LIQUIDS |
| FIELD: mechanical engineering; pumps.
EFFECT: provision of complete disengagement of delivery and suction chambers and accuracy of geometric form of screw flights. 4 dwg |
| Publishing date: December 2, 2003 |
|
| INSTALLATION FOR SINKING AND PULLING OUT OF PILES |
| FIELD: civil engineering.
EFFECT: increased load capacity and efficiency when operating under heavy ground conditions, reduced noise and vibration. 2 cl, 5 dwg |
| Publishing date: August 19, 2003 |
|
| SCREW-NUT TRANSMISSION |
| FIELD: mechanical engineering.
EFFECT: reduced axial size of transmission. 3 dwg |
| Publishing date: August 12, 2003 |
|
| FOLDING ROCKING ARMCHAIR (VERSIONS) |
| FIELD: furniture industry.
EFFECT: convenient use and wider operational capabilities. 21 cl, 4 dwg |
| Publishing date: August 12, 2003 |
|
| COLLAPSIBLE UMBRELLA |
| FIELD: light industry.
EFFECT: simplified construction and increased convenience in use. 5 cl, 1 dwg |
| Publishing date: July 29, 2003 |
|
| WORKING TOOL FOR DIGGING OUT OF SUGAR BEET ROOTS |
| FIELD: agricultural engineering.
EFFECT: increased efficiency in crumbling of soil layer, reduced loss of root weight by eliminating tail part fractures. 2 cl, 3 dwg |
| Publishing date: July 8, 2003 |
|
| MANNER TO CLOSE KEYHOLE AND DEVICE CLOSING KEYHOLE |
| FIELD: ironmongery.
EFFECT: enhanced resistance to unauthorized penetration. 2 cl, 4 dwg |
| Publishing date: April 15, 2003 |
|
| SWIRL GASOLINE PUMP TO DELIVER FUEL FROM TANK INTO VEHICLE ENGINE |
| FIELD: automotive industry.
EFFECT: simplified assembling of pump, provision of accurate angular arrangement of suction and delivery spaces of pump. 2 dwg |
| Publishing date: April 15, 2003 |
|
| DEVICE FOR TWO SIDE DRIVE OF VALVES OF INTERNAL COMBUSTION ENGINE |
| FIELD: mechanical engineering; internal combustion engines.
EFFECT: increased efficiency and service life of valve actuating mechanism units. 8 cl, 6 dwg |
| Publishing date: April 8, 2003 |
|
| PLASTIC BALL COCK |
| FIELD: shut-off fittings.
EFFECT: simplified construction; enhanced reliability. 4 cl, 1 dwg |
| Publishing date: March 25, 2003 |
|
| SELF-TIGHTENING DRIVE |
| FIELD: mechanical engineering.
EFFECT: increased efficiency. 5 cl, 6 dwg |
| Publishing date: March 18, 2003 |
|
| ADAPTOR FOR WELDING TUBES OF ALUMINUM ALLOYS WITH TUBES OF STAINLESS STEEL |
| FIELD: jointing by welding tubes of different metals, particularly tubular adaptors aluminum alloy - stainless steel.
EFFECT: improved design of adaptor providing its increased strength. 4 cl, 1 dwg, 1 ex |
| Publishing date: March 18, 2003 |
|
| ANTIDAZZLING LIGHT |
| FIELD: automotive industry.
EFFECT: enhanced safety of vehicle in darkness due to reduced dazzling of drivers by oncoming traffic. 3 cl, 3 dwg |
| Publishing date: March 4, 2003 |
|
| MACHINE FOR LOADING UNIT LOADS INTO CARS |
| FIELD: materials handling facilities.
EFFECT: reduced time taken for loading, increased accuracy of loading operations. 2 cl, 4 dwg |
| Publishing date: February 18, 2003 |
|
| SELF-FILLING AIR CUSHION (VERSIONS) |
| FIELD: shoe industry.
EFFECT: increased efficiency and simplified construction. 23 cl, 10 dwg |
| Publishing date: February 11, 2003 |
|
| GAS TURBINE ENGINE BOOSTING METHOD |
| FIELD: aviation.
EFFECT: increased thrust of gas turbine engine. 1 dwg |
| Publishing date: January 21, 2003 |
|
| AUTOMATIC GEARSHIFT MECHANISM OF MECHANICAL MULTIPLE-SPEED GEARBOX |
| FIELD: transport engineering.
EFFECT: simplified design, provision of accurate positioning of gearshift mechanism rods in neutral. 2 dwg |
| Publishing date: January 14, 2003 |
|
| FINGER IMPRINTS GAUGE |
| FIELD: medical engineering.
EFFECT: high reliability of gauge operation; simplified design. 10 cl, 5 dwg |
| Publishing date: December 17, 2002 |
|
| SYSTEM FOR AUTOMATIC CONTROL OF REVOLUTION NUMBER OF STAGE OF GAS TURBINE ENGINE |
| FIELD: automatic control of revolution number of stage of gas turbine engine.
EFFECT: improved design allowing to eliminate abnormal modes at operation of system. 8 cl, 10 dwg, 2 tbl |
| Publishing date: December 17, 2002 |
|
| ELECTROMECHANICAL CODE LOCK WITH SPACED ELECTROMAGNETIC LOCKING BARS |
| FIELD: locksmith's work.
EFFECT: enhanced efficiency of guard. 9 dwg |
| Publishing date: December 17, 2002 |
|
| CEDAR NUT CRACKING APPARATUS |
| FIELD: cedar nut processing equipment.
EFFECT: simplified construction, increased efficiency and reduced labour intensity. 2 cl, 4 dwg |
| Publishing date: December 3, 2002 |
|
| DEVICE FOR PROTECTING WINDOW AND DOOR OPENINGS |
| FIELD: construction engineering.
EFFECT: reliable and efficient protection of internal rooms of buildings and structures. 8 dwg |
| Publishing date: December 3, 2002 |
|
| APPARATUS FOR ABSORBING VIBRATIONS OF HOUSING AND INTERNAL PART OF DOMESTIC WASHING MACHINE WITH VERTICAL-AXIAL ROTATION OF SQUEEZING RESERVOIR |
| FIELD: domestic washing equipment.
EFFECT: simplified and compact construction by reduced sizes of hanger members, improved operating characteristics and increased efficiency. 7 dwg |
| Publishing date: November 26, 2002 |
|
| ROTOR AUTOMATIC BALANCER |
| FIELD: mechanical engineering.
EFFECT: improved efficiency of compensation of rotate system unbalance. 1 dwg |
| Publishing date: November 19, 2002 |
|
| MECHANISM WITH THERMOSENSITIVE DRIVE |
| FIELD: mechanical engineering.
EFFECT: improved reliability of mechanism in operation. 3 dwg |
| Publishing date: November 19, 2002 |
|
| AUTOMATIC INFINITELY VARIABLE MECHANICAL TRANSMISSION |
| FIELD: mechanical engineering.
EFFECT: extended range of automatic conversion of torque and increased efficiency of transmission. 9 cl, 2 dwg |
| Publishing date: November 19, 2002 |
|
| NUT WRENCH |
| FIELD: machine engineering, possibly assembling-disassembling operations, restoration of articles.
EFFECT: improved design, enhanced comfort of using nut wrench. 2 dwg |
| Publishing date: November 19, 2002 |
|
| READILY DETACHABLE HOSE TIP |
| FIELD: different type of water- and gas-conduits, pipelines for other liquids, in melioration for stationary sprinkling pipelines, sprinkling machines and aggregates needing use of stopper, nozzle or sprayer in end of hose.
EFFECT: enhanced fluid-tightness degree of tip-to-hose joint. 3 cl, 1 dwg |
| Publishing date: November 12, 2002 |
|
| DEVICE FOR FASTENING OF GLASS PLATES IN PITCHED ROOFS |
| FIELD: construction, in particular, device for fastening of glass plates in pitched roofs of buildings and green houses.
EFFECT: reduced labor content for mounting and expenditures connected with manufacture. 8 dwg |
| Publishing date: November 12, 2002 |
|
| MECHANISM FOR CONVERTING ROTARY MOTION INTO COMPLEX MOTION |
| FIELD: mechanical engineering and instrumentation engineering.
EFFECT: simplified design, enlarged kinematic capabilities of drive. 2 dwg |
| Publishing date: November 12, 2002 |
|
| METHOD AND DEVICE FOR DESTROYING OF OBJECTS |
| FIELD: destroying of objects kept in a container for safe transportation, provided with a device of the alarm signaling system.
EFFECT: a shock wave is generated so as to subject a very large surface to the action of the means of destroying. 8 cl, 4 dwg |
| Publishing date: November 12, 2002 |
|
| SHACKLESS PADLOCK |
| FIELD: locksmith's work.
EFFECT: enhanced resistance to breaking. 6 dwg |
| Publishing date: October 29, 2002 |
|
| APPARATUS FOR PREVENTING SHOES FROM SLIDING (VERSIONS) |
| FIELD: shoe industry.
EFFECT: simplified construction and convenient use. 9 cl, 7 dwg |
| Publishing date: October 29, 2002 |
|
| DEVICE FOR BUILDING-UP ULTRAHIGH PRESSURE |
| FIELD: production of superhard materials; devices for building-up ultrahigh pressures in production of superhard materials from diamond powder and cubic boron nitride.
EFFECT: increased productivity at high operational stability. 2 dwg, 1 tbl |
| Publishing date: October 22, 2002 |
|
| SUCKLE FEEDER HOLDER |
| FIELD: agriculture.
EFFECT: simplified construction and increased efficiency. 2 dwg |
| Publishing date: October 1, 2002 |
|
| GRINDER FOR PLASTIC MATERIAL |
| FIELD: grinding equipment used in chemical and other branches of industry.
EFFECT: increased efficiency and simplified construction. 6 dwg |
| Publishing date: September 24, 2002 |
|
| METHOD FOR MANUFACTURE OF LOCK AND LOCK |
| FIELD: locksmith's work.
EFFECT: enhanced resistance to an unauthorized access. 2 cl, 3 dwg |
| Publishing date: September 17, 2002 |
|
| COLLAPSIBLE CANE FOR BLIND PEOPLE |
| FIELD: walking facilitating device.
EFFECT: simplified construction and convenient use. 3 dwg |
| Publishing date: August 27, 2002 |
|
| SELF-OPERATING PUMP |
| FIELD: water lifts, type airlift actuated by solar energy.
EFFECT: enhanced efficiency. 3 cl, 1 dwg |
| Publishing date: August 20, 2002 |
|
| METHOD FOR REINFORCEMENT OF FOUNDATION-BEDS OF BUILDINGS AND FOUNDATIONS OF STRUCTURES |
| FIELD: civil engineering, applicable in reinforcement of foundations of existing buildings and structures with arrangement of drainage and service lines of various kinds.
EFFECT: simplified method, enhanced reliability of reinforcement of the building foundation-bed or structure foundation, prevented excessive humidification of the foundation, provided drainage of ground and industrial waste waters, as well as drying of foundation. 4 cl, 5 dwg |
| Publishing date: August 13, 2002 |
|
| DOOR CLOSING DEVICE |
| FIELD: construction and servicing of buildings and structures, in particular, design of doors and hatches.
EFFECT: improved operating characteristics of the door closing device, in particular, maintainability and reliability. 3 dwg |
| Publishing date: August 13, 2002 |
|
| DEVICE FOR PRODUCTION UNDER DESERT CONDITIONS |
| FIELD: technology of water supply, particularly, supply with potable water under field desert conditions.
EFFECT: higher efficiency of device in production of water from transpiration moisture of desert plants. 2 dwg |
| Publishing date: July 23, 2002 |
|
| INFLATABLE WATER-SKIS |
| FIELD: water-skis for tourism, hunting, sports, relaxation in rivers, lakes and water basins.
EFFECT: enhanced reliability; ease in use; compactness in transportation. 5 cl, 4 dwg |
| Publishing date: July 16, 2002 |
|
| ANTISKID DEVICE FOR WINTER BOOTS |
| FIELD: shoe industry.
EFFECT: simplified construction and increased efficiency. 4 cl, 1 dwg |
| Publishing date: July 9, 2002 |
|
| INSTALLATION FOR PAINTING ROPES OF SUSPENSION BRIDGES |
| FIELD: processes and equipment for painting elongated cylindrical articles such as ropes of suspension bridges.
EFFECT: enhanced efficiency of painting articles at high altitude. 4 dwg |
| Publishing date: July 9, 2002 |
|
| AUTOMATIC COMPOSTING BIOLOGICAL LAVATORY APPARATUS |
| FIELD: sanitary engineering.
EFFECT: simplified construction and increased efficiency. 5 cl, 4 dwg |
| Publishing date: June 25, 2002 |
|
| DEICING SYSTEM FOR DOME-COVERED SATELLITE ANTENNA |
| FIELD: satellite communications engineering.
EFFECT: reduced probability of communications failure in bad weather. 13 cl, 7 dwg |
| Publishing date: June 18, 2002 |
|
| DEVICE FOR MANUFACTURE OF OPTICAL CABLE |
| FIELD: manufacture of optical cables.
EFFECT: enhanced quality of manufacture. 17 cl, 10 dwg |
| Publishing date: May 28, 2002 |
|
| METHOD AND DEVICE FOR WITHDRAWAL OF OIL FROM SOLID OIL-CONTAINING MATERIALS |
| FIELD: continuous withdrawal of oil from solid agents such as oilbearing sands, plants or other solid matter by means of solvent.
EFFECT: enhanced efficiency. 50 cl, 5 dwg |
| Publishing date: May 28, 2002 |
|
| METHOD AND DEVICE FOR HEAVING-OFF THE SHIP |
| FIELD: sea and river transport; methods of heaving-off the ships.
EFFECT: enhanced reliability. 3 cl, 1 dwg |
| Publishing date: May 14, 2002 |
|
| WORKING TOOL FOR EXTRACTING PLANT ROOT MASS |
| FIELD: agricultural engineering.
EFFECT: increased efficiency, reduced power consumption and improved quality of extracted raw material. 25 cl, 15 dwg |
| Publishing date: April 16, 2002 |
|
| DEVICE FOR PACKING ARTICLES IN SHRINKABLE FILM |
| FIELD: food industry; packing.
EFFECT: reduced consumption of energy both for heat generating and forming air flow. 9 cl, 3 dwg |
| Publishing date: April 16, 2002 |
|
| DEVICE FOR PRODUCTION OF DIAMONDS |
| FIELD: production of diamonds; chemical industry.
EFFECT: enhanced efficiency. |
| Publishing date: March 19, 2002 |
|
| DEVICE FOR TAKING EGGS OUT OF LININGS (VERSIONS) |
| FIELD: food industry; egg treatment and processing.
EFFECT: provision of simple and reliable high-capacity device featuring high quality unloading of eggs and reduced egg breakage. 3 cl, 6 dwg |
| Publishing date: March 5, 2002 |
|
| PIG FEEDING UNIT |
| FIELD: pig-breeding.
EFFECT: enhanced efficiency. 2 cl, 2 dwg |
| Publishing date: February 27, 2002 |
|
| CRYSTAL GROWING APPARATUS |
| FIELD: growing of optical crystals by Czochralsky process.
EFFECT: simplified manufacture and maintenance of apparatus. 2 cl, 3 dwg |
| Publishing date: January 29, 2002 |
|
| GEAR DETECTING OBJECTS IN PROTECTED ZONE |
| FIELD: equipment for detection of objects in protected zone and for simultaneous registration of impact mechanical action on protected object.
EFFECT: expanded functional capabilities of gear 2 dwg. |
| Publishing date: January 22, 2002 |
|
| FISH SCALING KNIFE |
| FIELD: domestic equipment.
EFFECT: increased efficiency in fish cleaning, simplified construction and improved safety for user. 2 cl |
| Publishing date: January 9, 2002 |
|
| METHOD OF CLOSING KEYHOLE AND METAL DOOR |
| FIELD: locking equipment.
EFFECT: wider operational capabilities and wider range of locking device used for closing of keyholes. |
| Publishing date: May 30, 2001 |
|
| DEVICE FOR PRODUCING COMPRESSED AIR AND FEEDING RIVER WATER DUE TO WATER CURRENT ENERGY |
| FIELD: hydraulic engineering.
EFFECT: simplified design; provision for operation under air-compression and water- delivery conditions. |
| Publishing date: May 30, 2001 |
|
| PLUG COCK |
| FIELD: water-and-chemical modes of operation and technology. SUBSTANCE: method may be used in cooling systems, cold and hot-water supply systems, heat-supply systems and in circuits of thermal and self-contained electric power plants. |
| Publishing date: April 4, 2001 |
|
| GEAR OF SMALL SIZES |
| The work of a gear is based on realization of internal cylindrical gearing with a small difference of quantity of wheels tooth's. From the existent similar gears this gear differs by evolutary gearing and essentially other kinematics. It allows him to be on one level with multistage planetary gears. At the same efficiency and transmitted capacity, the gear has minimum mass, dimensions and more profitable cost. |
| Publishing date: March 29, 2001 |
|
| SHAFT-BUSHING INTERFERENCE FIT CONNECTION TECHNIQUE |
| The proposed technology provides for a technological rod to be attached on to the shaft end. Then, a heated drive-in cylinder is attached to that rod and it is that cylinder that is used for driving the shaft over the bushing. |
| Publishing date: October 11, 2000 |
|
| GRINDING METHOD |
| As distinct from the ordinary sequential multi-stage grinding cycle with the use of a grinding wheel with application of a metal-cutting oil, according to the proposed technology used as a grinding wheel is the wheel with radial passages, grooves, slots or through... |
| Publishing date: August 21, 2000 |
|
| GRINDING WHEEL DRESSING METHOD |
| He traditional method of grinding wheel dressing includes displacement of the dressing tool along the moving line of the grinding wheel and imparting oscillations to it normal to the wheel operating... |
| Publishing date: August 21, 2000 |
|
Details, units and mechanisms
